Maytag MGDP586KW dimensions

Maytag's gas dryer MGDP586KW is listed at 27 in wide, 42.5 in tall and 29.25 in deep, and needs 53 in of floor in front of the wall with the door open.

Width
27 in
Height
42.5 in
Depth
29.25 in
overall, as listed
Door open
53 in
depth with door at 90°

The opening it needs

Opening width
27 in
width only: no side gap listed
Opening height
42.5 in
height only: no top gap listed
Depth from wall
29.25 in
depth only: no back gap listed

opening width = width + 2 × side clearance · opening height = height + top clearance · depth from wall = depth + back clearance

The maker's data we fetched lists no air clearances for this model, so the figures above are the bare unit size. Most makers ask for a small gap at the sides, top and back; check the installation guide before you commit to a tight space.

Full dimensions and clearances

Width27 in
Height (overall)42.5 in
Adjustable height range42 in to 43.25 in
Depth (overall)29.25 in
Depth with the door open 90°53 in
Weight (net)116.46 lb
Capacity7.4 cu ft
Electrical120 V, 15 A
FuelGas
Reversible doorYes
Stackable (maker says)No

As listed by Whirlpool Corporation on 2026-11-17. A dash or a missing row means the maker's data did not include that figure; we do not fill gaps with estimates.

Getting it into the house

The maker's data we fetched gives no doors-off depth for this model, so we cannot say how narrow it gets with the doors removed. With everything attached, the narrowest side is 27 in (the width). Measure the clear width of each doorway on the route (between the door stops) and allow for the dolly.

It weighs 116.46 lb, which matters for stairs and upper-floor laundry rooms.

Stacking

Maytag lists this dryer as not stackable.

Search Amazon for Maytag MGDP586KW

This opens an Amazon search for the model number. We have not matched it to a specific listing; check the model number on the listing before you buy. Large appliances are often sold by other retailers instead.

As an Amazon Associate I earn from qualifying purchases.

Other gas models within half an inch of this width