Methodology

Where the numbers come from

Every dimension, clearance, weight and electrical figure on this site is copied from the maker's own published specifications for that model. We fetched them on 2026-11-17; each model page shows its own fetch date and links to the maker page. Sources:

We keep numbers and yes/no facts only (for example "Stackable: Yes"). We do not copy product descriptions or photos. Makers revise specifications, sell regional variants and occasionally publish typos, so the maker page and the installation guide in the box remain the final word. Check them before you cut a cabinet or book a delivery.

Which models are included

For GE and GE Profile we took the models certified under ENERGY STAR (a list of current US models) and fetched the GE spec page for one model number per certified model family; finishes of the same family share dimensions. For Whirlpool, Maytag, KitchenAid, Amana, Frigidaire and Electrolux we used each brand site's product catalogue. For LG, Bosch and Thermador we used the brand's US sitemap. Accessories, wine and beverage coolers, freezers and washer-dryer combos are left out.

When several finishes of one model have identical dimensions and their model numbers differ only in the last few characters (usually the colour code), they share one page and the others are listed as "other finishes".

Not covered yet: Samsung, Café, Haier, Monogram, Midea and Hisense. Their sites either load specifications only inside the browser or answer automated requests with a bot challenge. We do not work around those, so these brands wait until we can get their data the way their sites allow.

How we collected it

A small script requested one page at a time from each maker's site, at least 1.5 seconds apart, identifying itself as an ordinary desktop browser, and backed off when a site said it was busy. Everything it fetched is kept so a refresh does not hit the makers again for pages we already have.

Checks before a number is shown

How the opening is worked out

opening width = width + 2 × side clearance
opening height = height + top clearance
depth from the wall = depth (with handles where listed) + back clearance

The clearances are the air gaps the maker lists. When the maker lists none, nothing is added and the page says so; most makers still ask for a small gap in their installation guide, so leave yourself a margin. For refrigerators the height is to the top of the hinge where the maker gives it, because the hinge cap is usually the highest point.

Dishwashers and built-in refrigerators: when the maker lists a required cutout, we show that and use it in place of the formula. A "24-inch" dishwasher means a 24-inch cabinet opening; the unit itself is usually about 23.5 to 24 inches wide.

Getting it through a doorway

Refrigerator doors and handles usually come off for delivery. When the maker lists the depth without doors (the case depth), we show the narrowest side with the doors removed and use it for the "fits through a 28 / 30 / 32-inch door" lists, which require that figure to be at least half an inch under the door width. If the maker does not list a doors-off depth, the model is not on those lists and its page gives the narrowest side with everything attached.

Stackable pairs

A washer and dryer are paired only when the maker lists both as stackable, they are the same brand and model-number series, and their widths are within a quarter inch. Stacked height is the washer height plus the dryer height as listed; a stacking kit can add a little, and you need room above for venting and hoses.

Cross-check against ENERGY STAR

ENERGY STAR publishes a width and height for certified refrigerators, washers and dryers (and width and depth for dishwashers). Where a model is in both datasets, most widths and heights agree within half an inch; the misses are mostly ENERGY STAR listing a nominal size (36 in for a 35.25-inch built-in) or a figure in the wrong column. Where they disagree, we show the maker's figure.

What this site does not do

No testing, no reviews, no rankings, no running costs. For yearly energy cost see our sister site, Appliance Energy Guide.