LG WT5170HV dimensions

LG's top load washer WT5170HV is listed at 27 in wide, 45.375 in tall and 28.375 in deep, and needs 55.75 in of floor in front of the wall with the door open. The same dimensions apply to the other finish: WT5170HW.

Width
27 in
Height
45.375 in
Depth
28.375 in
overall, as listed
Door open
55.75 in
depth with door at 90°

The opening it needs

Opening width
27 in
width only: no side gap listed
Opening height
45.375 in
height only: no top gap listed
Depth from wall
28.375 in
depth only: no back gap listed

opening width = width + 2 × side clearance · opening height = height + top clearance · depth from wall = depth + back clearance

The maker's data we fetched lists no air clearances for this model, so the figures above are the bare unit size. Most makers ask for a small gap at the sides, top and back; check the installation guide before you commit to a tight space.

Full dimensions and clearances

Width27 in
Height (overall)45.375 in
Depth (overall)28.375 in
Depth with the door open 90°55.75 in
Weight (net)145.5 lb
Capacity4.7 cu ft
Electrical120 V, 10 A

As listed by LG Electronics USA on 2026-11-17. A dash or a missing row means the maker's data did not include that figure; we do not fill gaps with estimates.

Getting it into the house

The maker's data we fetched gives no doors-off depth for this model, so we cannot say how narrow it gets with the doors removed. With everything attached, the narrowest side is 27 in (the width). Measure the clear width of each doorway on the route (between the door stops) and allow for the dolly.

It weighs 145.5 lb, which matters for stairs and upper-floor laundry rooms.

Stacking

The maker's data we fetched does not say whether this washer stacks.

Search Amazon for LG WT5170HV

This opens an Amazon search for the model number. We have not matched it to a specific listing; check the model number on the listing before you buy. Large appliances are often sold by other retailers instead.

As an Amazon Associate I earn from qualifying purchases.

Other top load models within half an inch of this width