Whirlpool WTW4955HW dimensions

Whirlpool's top load washer WTW4955HW is listed at 27.5 in wide, 44 in tall and 27 in deep.

Width
27.5 in
Height
44 in
Depth
27 in
overall, as listed

The opening it needs

Opening width
27.5 in
width only: no side gap listed
Opening height
44 in
height only: no top gap listed
Depth from wall
27 in
depth only: no back gap listed

opening width = width + 2 × side clearance · opening height = height + top clearance · depth from wall = depth + back clearance

The maker's data we fetched lists no air clearances for this model, so the figures above are the bare unit size. Most makers ask for a small gap at the sides, top and back; check the installation guide before you commit to a tight space.

Full dimensions and clearances

Width27.5 in
Height (overall)44 in
Height with the lid open52 in
Depth (overall)27 in
Weight (net)115 lb
Capacity3.8 cu ft
Electrical120 V, 15 A
Stackable (maker says)No

As listed by Whirlpool Corporation on 2026-11-17. A dash or a missing row means the maker's data did not include that figure; we do not fill gaps with estimates.

Getting it into the house

The maker's data we fetched gives no doors-off depth for this model, so we cannot say how narrow it gets with the doors removed. With everything attached, the narrowest side is 27 in (the depth). Measure the clear width of each doorway on the route (between the door stops) and allow for the dolly.

It weighs 115 lb, which matters for stairs and upper-floor laundry rooms.

Stacking

Whirlpool lists this washer as not stackable.

Search Amazon for Whirlpool WTW4955HW

This opens an Amazon search for the model number. We have not matched it to a specific listing; check the model number on the listing before you buy. Large appliances are often sold by other retailers instead.

As an Amazon Associate I earn from qualifying purchases.

Other top load models within half an inch of this width