KitchenAid KRMF706EBS dimensions

KitchenAid's French door KRMF706EBS is listed at 35.625 in wide, 70.125 in tall and 36.25 in deep (34.5 in without handles), and needs 49 in of floor in front of the wall with the door open.

Width
35.625 in
Height
70.125 in
to top of hinge
Depth
36.25 in
with handles
Door open
49 in
depth with door at 90°

The opening it needs

For a built-in installation KitchenAid lists a required cutout of 36 in wide × 69 in high. Use that, not the unit size, to plan the cabinetry.

Full dimensions and clearances

Width35.625 in
Height (overall, to top of hinge)70.125 in
Height to top of case68.375 in
Depth (overall, with handles)36.25 in
Depth without handles34.5 in
Depth without doors (case depth)29 in
Depth with the door open 90°49 in
Required cutout width36 in
Required cutout height69 in
Capacity25.76 cu ft
Electrical115 V, 20 A
Counter-depth (maker label)No
InstallationFreestanding

As listed by Whirlpool Corporation on 2026-11-17. A dash or a missing row means the maker's data did not include that figure; we do not fill gaps with estimates.

Getting it into the house

KitchenAid lists a depth without doors of 29 in. With the doors and handles off, the narrowest side is 29 in, so a doorway needs a clear width of more than that (measure between the door stops, not the frame). With the doors on, the narrowest side is 35.625 in.

Search Amazon for KitchenAid KRMF706EBS

This opens an Amazon search for the model number. We have not matched it to a specific listing; check the model number on the listing before you buy. Large appliances are often sold by other retailers instead.

As an Amazon Associate I earn from qualifying purchases.

Listed in

Other french door models within half an inch of this width