Maytag MFW2055FRZ dimensions

Maytag's French door MFW2055FRZ is listed at 30.125 in wide, 68.375 in tall and 34.375 in deep (32.25 in without handles), and needs 44.125 in of floor in front of the wall with the door open.

Width
30.125 in
Height
68.375 in
to top of hinge
Depth
34.375 in
with handles
Door open
44.125 in
depth with door at 90°

The opening it needs

For a built-in installation Maytag lists a required cutout of 30 in wide × 68 in high. Use that, not the unit size, to plan the cabinetry.

Full dimensions and clearances

Width30.125 in
Height (overall, to top of hinge)68.375 in
Height to top of case67.5 in
Depth (overall, with handles)34.375 in
Depth without handles32.25 in
Depth without doors (case depth)28 in
Depth with the door open 90°44.125 in
Required cutout width30 in
Required cutout height68 in
Weight (net)248.5 lb
Capacity19.68 cu ft
Electrical120 V
Counter-depth (maker label)No
InstallationFreestanding

As listed by Whirlpool Corporation on 2026-11-17. A dash or a missing row means the maker's data did not include that figure; we do not fill gaps with estimates.

Getting it into the house

Maytag lists a depth without doors of 28 in. With the doors and handles off, the narrowest side is 28 in, so a doorway needs a clear width of more than that (measure between the door stops, not the frame). With the doors on, the narrowest side is 30.125 in.

It weighs 248.5 lb, which matters for stairs and upper-floor laundry rooms.

Search Amazon for Maytag MFW2055FRZ

This opens an Amazon search for the model number. We have not matched it to a specific listing; check the model number on the listing before you buy. Large appliances are often sold by other retailers instead.

As an Amazon Associate I earn from qualifying purchases.

Listed in

Other french door models within half an inch of this width