Thermador T42IT100NP dimensions

Thermador's bottom freezer T42IT100NP is listed at 41.25 in wide, 83.562 in tall and 24 in deep. The same dimensions apply to the other finish: T42IT102NP.

Width
41.25 in
Height
83.562 in
to top of hinge
Depth
24 in
overall, as listed

The opening it needs

For a built-in installation Thermador lists a required cutout of 42 in wide × 84 in high × 25 in deep. Use that, not the unit size, to plan the cabinetry.

Full dimensions and clearances

Width41.25 in
Height (overall, to top of hinge)83.562 in
Depth (overall)24 in
Required cutout width42 in
Required cutout height84 in
Required cutout depth25 in
Weight (gross, as listed)617 lb
Capacity23.1 cu ft
InstallationFreestanding

As listed by BSH Home Appliances on 2026-11-17. A dash or a missing row means the maker's data did not include that figure; we do not fill gaps with estimates.

Getting it into the house

The maker's data we fetched gives no doors-off depth for this model, so we cannot say how narrow it gets with the doors removed. With everything attached, the narrowest side is 24 in (the depth). Measure the clear width of each doorway on the route (between the door stops) and allow for the dolly.

It weighs 617 lb with packaging (gross weight as listed), which matters for stairs and upper-floor laundry rooms.

Running cost: see what the T42IT100NP uses a year on Appliance Energy Guide, our sister site.

Search Amazon for Thermador T42IT100NP

This opens an Amazon search for the model number. We have not matched it to a specific listing; check the model number on the listing before you buy. Large appliances are often sold by other retailers instead.

As an Amazon Associate I earn from qualifying purchases.

Other bottom freezer models within half an inch of this width