Whirlpool WRB322DMBM dimensions

Whirlpool's bottom freezer WRB322DMBM is listed at 32.625 in wide, 70 in tall and 33.375 in deep (30.875 in without handles), and needs 62 in of floor in front of the wall with the door open. The same dimensions apply to 2 other finishes: WRB322DMBB, WRB322DMBW.

Width
32.625 in
Height
70 in
to top of hinge
Depth
33.375 in
with handles
Door open
62 in
depth with door at 90°

The opening it needs

For a built-in installation Whirlpool lists a required cutout of 33 in wide × 69 in high. Use that, not the unit size, to plan the cabinetry.

Full dimensions and clearances

Width32.625 in
Height (overall, to top of hinge)70 in
Height to top of case68.5 in
Depth (overall, with handles)33.375 in
Depth without handles30.875 in
Depth without doors (case depth)28.125 in
Depth with the door open 90°62 in
Required cutout width33 in
Required cutout height69 in
Capacity22.07 cu ft
Electrical120 V, 15 A
Counter-depth (maker label)No
Reversible doorYes
InstallationFreestanding

As listed by Whirlpool Corporation on 2026-11-17. A dash or a missing row means the maker's data did not include that figure; we do not fill gaps with estimates.

Getting it into the house

Whirlpool lists a depth without doors of 28.125 in. With the doors and handles off, the narrowest side is 28.125 in, so a doorway needs a clear width of more than that (measure between the door stops, not the frame). With the doors on, the narrowest side is 32.625 in.

Search Amazon for Whirlpool WRB322DMBM

This opens an Amazon search for the model number. We have not matched it to a specific listing; check the model number on the listing before you buy. Large appliances are often sold by other retailers instead.

As an Amazon Associate I earn from qualifying purchases.

Listed in

Other bottom freezer models within half an inch of this width